The QUASAR 2.0 with diffuse reflection system, increasing the angle of light to 180 degrees and 8000k lumens the brightest drain plug light that exists!
At only 2.5" wide and 1.25" long makes this light the most compact and powerful of ANY type of underwater led that is made!
Male threads are offset in case of surf wedge or drains that are at the very edge or lowest point of the hull.
1/2" NPT drain threads, 6061 billet marine grade, hard anodized black 6061 aluminum.
The light is removed via a bored hole off center. Simply insert a philips screw driver through the light to install and remove.
Is your boats drain flange really low? Concerned with the light dragging in the water? How about being able to drain the boat easily? Click HERE to solve all that!
This LED Fixture will illuminate 180 degrees in the water, it will light up the wake as well as everything else!
If you use this light in saltwater, apply TEFGEL to all fittings (available in our online store)
The light includes an inboard mounted driver.
The LED's have a 50,000 hour life expectancy.
12 to 24 volt input
If you are buying a blue light and will be using it while the boat is connected to shore power, generators or battery chargers, let us know in the notes section at checkout.
Limited Lifetime warranty.
We recommend using our basic $12 remote control for ease of install for the solid color LEDs, found on the "accessories" tab, check it out by CLICKING HERE.
Check out a switch option by CLICKING HERE.
Check out the drain tee option by CLICKING HERE.
NOTE: Color changing (RGB) version requires one of our controllers that can be found by clicking HERE or under the "accessories" tab of our site.
CLICK HERE IF your wakeplate is in the way, like the photo below and your drain flange is close to it, all you need to do is remove the bolt (circled in blue) let the plate hinge down, install the extension (link above) and screw in the light. This will allow it to clear the hinged area.